A simple, cost effective method of producing 1–10µS/cm purified water at low volumes. The Labwater units incorporate an easily replaceable cartridge, containing specifically designed resin, which changes colour through absorption of ionic contaminants, facilitating a low level of maintenance. On complete colour change from blue to brown, replace the cartridge. A coil & gun can be added for accurate dispensing.
The units are typically wall mounted and are simply connected via a dedicated 12mm braided hose (supplied separately) to a tap or stopcock and operate direct from water pressure thus requiring no external electrical supply.
- Wall brackets and connections
- Deionisation cartridge plus one spare
- Colour change resin
- Inlet on/off valve with 12mm hose connector
- Outlet spout with flexible pipe
Suez Labwater Installation Requirements
- Feedwater: Potable
- Maximum TDS (ppm): 1000
- Feed water temperature: 1-35°C
- Max. feed pressure (bar): 0.5-5
- Max. feed flow rate (l/hr): Labwater 1: 30/ Labwater 2: 60
A deioniser ideal for general laboratory applications which typically require up to 5 litres per day of deionised water. This product is ideal for intermittent use, with a typical output of 160 litres based on a supply containing 200mg/l of total dissolved solids.
A deioniser suitable for general laboratory applications typically requiring up to 30 litres per day of deionised water. This product is ideal for intermittent use, with a typical output of 320 litres based on a supply containing 200mg/l of total dissolved solids.