Take melting point measurements of up to three samples at once for greater efficiency. Simple to operate, the instructions are printed directly on the unit. Place your sample in a capillary tube and insert it into the aluminum block. Manually set the heating rate between 1 and 20°C per minute, up to a maximum of 250°C. Lowering the heating rate as you near the expected melting point temperature will increase the accuracy of the reading. Observe the sample through the magnifying lens until the melt occurs and read the melt temperature from the thermometer.
- Integral LED illumination and magnifying lens make viewing easy
- No complicated programming – place sample in capillary tube, set heating rate, and watch for melt
- Supplied with blue spirit filled thermometer and 100 x capillary tubes (open at one end)
- Optional brass cooling plug (sold separately) to speed up cooling when multiple runs are needed